Raspberry Pi Setup

by alister · 2 May 2013

Install and configure Raspbian

Download image from http://www.raspberrypi.org/downloads

Copy over image to the SD Card
sudo dd bs=1m if=/Users/alisterjupp/Downloads/2013-02-09-wheezy-raspbian.img of=/dev/rdisk5

Extend OS to full size of SD Card via raspi-config at first boot

Set static ip
sudo nano /etc/network/interfaces
Change the line that reads

iface eth0 inet dhcp

iface eth0 inet static

with info below following;

address 192.168.0.111 netmask 255.255.255.0 network 192.168.0.0 broadcast 192.168.0.255 gateway 192.168.0.1

sudo apt-get update

sudo apt-get upgrade -y

sudo ln -sf /usr/share/zoneinfo/Australia/Perth /etc/localtime

sudo apt-get install git-core

Get/setup repo: git clone https://github.com/Gadgetoid/WiringPi2-Python.git

cd WiringPi2-Python

Build & install with: sudo python setup.py install